Special Adapter (Differential Line Driver Output - Mitsubishi Electric Melsec-F FX3GC Series User Manual

FX /FX /FX /FX /FX
3S 3G 3GC 3U 3UC
Common Items
1.2.3

Special Adapter (Differential Line Driver Output)

The special adapter can output pulse trains of up to 200 kHz using the positioning functionality incorporated in
the FX PLC, and can simultaneously control up to 4 axes.
3U
Up to 2 high-speed output special adapters (FX
• The first FX
3U
• The second FX
FX -2HSY-ADP
3U
2nd
1st
Cautions when connecting special adapters
• To use high-speed output special adapters only (not to use the other special adapters), it is not necessary
to connect the expansion board.
• To use the analog, communication, and CF card special adapters, be sure to connect the expansion board.
• To use high-speed output special adapters together with the analog, communication, and/or CF card
special adapters, connect the high-speed output special adapters to the expansion board (already
connected to the FX
CF card special adapter(s).
Analog special adapter
Communication special adapter
CF card special adapter
A - 6
PLC User's Manual - Positioning Control Edition
-2HSY-ADP uses Y000 and Y004, and Y001 and Y005.
-2HSY-ADP uses Y002 and Y006, and Y003 and Y007.
3U
FX PLC
3U
1-axis
Servo motor
(Servo amplifier)
Y000
Y001
+
+
Y004
Y005
PLC) first, and then connect the analog special adapters, communication, and/or
3U
High-speed output
special adapter
1.2 Introduction of Products Needed for Positioning
-2HSY-ADP) can be connected to the FX
3U
2-axes 3-axes
Servo motor Servo motor
(Servo amplifier) (Servo amplifier)
Y002
+
Y006
Expansion board
RDA
RD
RDB
SDA
SD SDB
SG
1 Introduction
PLC.
3U
4-axes
Servo motor
(Servo amplifier)
Y003
+
Y007
FX PLC
3U