Pulse Monitor - Mitsubishi Electric 800 Series Instruction Manual

5.5.7

Pulse monitor

Various pulses can be monitored.
Pr. Name
430
Pulse monitor selection
B011
635 Cumulative pulse clear

M610 signal selection
636 Cumulative pulse

M611 division scaling factor
Control terminal option-
637

Cumulative pulse
M612
division scaling factor
638 Cumulative pulse

M613 storage

The setting is available when a vector control compatible option is installed.
Pulse monitor selection (Pr.430)
• Shows the various pulse conditions during operation as the number of pulses. Set "0" in Pr.52 Operation panel main
monitor selection to display the output frequency monitor.
Vector Vector Vector
Initial
Setting range
value
0 to 5, 12, 13,
100 to 105, 112, 113,
1000 to 1005, 1012,
1013, 1100 to 1105,
1112, 1113,
2000 to 2005, 2012,
9999
2013, 2100 to 2105,
2112, 2113,
3000 to 3005, 3012,
3013, 3100 to 3105,
3112, 3113
8888, 9999
0 0 to 3
1 1 to 16384
1 1 to 16384
0 0 to 3
Position control under vector control
Description
Shows the various pulse conditions during operation as
the number of pulses.
Shows the frequency monitor.
Select the clearing method for the cumulative pulse
monitor.
Set the division scaling factor on the cumulative pulse for
the Vector control compatible plug-in option (FR-A8AP).
Set the division scaling factor on the cumulative pulse for
the control terminal option (FR-A8TP).
Select the processing method for the cumulative pulse
monitor value when the power is turned OFF or the
inverter is reset.
PARAMETERS
5
227