Mitsubishi Electric 800 Series Instruction Manual page 539

(A) Application parameters
Digital source (monitored item) selection
• Select the digital sources (input/output signals) to be set to Pr.1038 to Pr.1045 from the table below. When a value other
than the below, 0 (OFF) is applied for display.
Setting Signal
value name
0 —
1 STF
2 STR
3 AU
4 RT
5 RL
6 RM
7 RH
8 JOG
9 MRS
STP
10
(STOP)
11 RES
12 CS
21 X0
22 X1
23 X2
24 X3
25 X4
26 X5
27 X6
28 X7
29 X8
30 X9
31 X10
32 X11
33 X12
34 X13
35 X14
36 X15
37 DY
Trigger setting (Pr.1025, Pr.1035 to Pr.1037, Pr.1046, Pr.1047)
• Set the trigger generating conditions and trigger target channels.
Pr.1025
setting
0 Trace starts when inverter enters an fault status (protective function activated)
1 Trace starts when analog monitor satisfies trigger conditions
2 Trace starts when digital monitor satisfies trigger conditions
3 Trace starts when either of analog or digital monitor satisfies trigger conditions (OR)
4 Trace starts when both of analog or digital monitor satisfies trigger conditions (AND)
• Set the trigger generation conditions for the analog monitor.
Pr.1036
setting
Sampling starts when the analog data targeted for the trigger exceeds the value
0
specified at the trigger level
Sampling starts when the analog data targeted for the trigger has fallen below the value
1
specified at the trigger level

For Pr.1037, set the number obtained by adding 1,000 to the trigger level.
• Set the trigger generation conditions for the digital monitor.
Pr.1047
setting
0 Trace starts when the digital data targeted for the trigger turns ON
1 Trace starts when the digital data targeted for the trigger turns OFF
538
PARAMETERS
Remarks
—
For the details of the signals, refer to
page 415.
For the details of the signals, refer to
the Instruction Manual of FR-A8AX
(option).
Trigger generating conditions
Trigger generation conditions
Trigger generation conditions
Setting Signal
value name
101 RUN
102 SU
103 IPF
For the details of the signals, refer to
104 OL
page
105 FU
106 ABC
107 ABC2
121 DO0
122 DO1
123 DO2
For the details of the signals, refer to
124 DO3 the Instruction Manual of FR-A8AY
(option).
125 DO4
126 DO5
127 DO6
128 RA1
For the details of the signals, refer to
129 RA2 the Instruction Manual of FR-A8AR
(option).
130 RA3
Remarks
370.
Selection of trigger
target channel
—
Pr.1035
Pr.1046
Pr.1035, Pr.1046
Pr.1035, Pr.1046
Trigger level setting
Set the trigger level by
Pr.1037 (-400% to 400%)
