Pulse Monitor - Mitsubishi Electric 800 Series Instruction Manual (Function

7.4

Pulse monitor

Vector Vector Vector
Various pulses can be monitored.
Pr. Name
430
Pulse monitor selection
B011
 Pulse monitor selection (Pr.430)
• To show any of pulse conditions as the number of pulses during operation, set "0" in Pr.52 Operation panel main monitor
selection. The output frequency will be displayed.
• Setting "26 to 31" in Pr.52, Pr.774 to Pr.776, Pr.992 (multifunction monitor) changes the electronic gear operation setting
in the case of monitoring pulses. (Refer to
Pr.430 setting
[][][]0
[][][]1
[][][]2
Pulse monitor selection
[][][]3
[][][]4
[][][]5
[]0[][]
For pulse monitor
selection
[]1[][]
0[][][]
For the multifunction
monitor / PLC function
special register
1[][][]
8888
Output frequency display
9999 (initial value)
 Pulse monitor display on the operation panel
• The position command, current position, and the status of droop pulses can be displayed on the operation panel.
Display data
Lower monitor
10000
Upper monitor
Lower monitor
100
Upper monitor
Lower monitor
100000000
*1
(9-digit)
Upper monitor
Initial value Setting range
0 to 5, 100 to 105, 1000 to
1005, 1100 to 1105
9999
8888, 9999
page 310.)
Description
Displays the lower of the position command (accumulated value of
command pulses).
Displays the upper of the position command (accumulated value of
command pulses).
Displays the lower of the current position (accumulated value of feedback
pulses).
Displays the upper of the current position (accumulated value of feedback
pulses).
Displays the lower of the accumulated value of droop pulses.
Displays the upper of the accumulated value of droop pulses.
Displays the value after electronic gear for position command, current
position, or droop pulses to be monitored (pulse monitor).
Displays the value before electronic gear for position command, current
position, or droop pulses to be monitored (pulse monitor).
Displays the value before electronic gear for position command, current
position, or droop pulses to be monitored (multifunction monitor).
Displays the value before electronic gear for position command, current
position, or droop pulses to be monitored (PLC function special register).
Displays the value after electronic gear for position command, current
position, or droop pulses to be monitored (multifunction monitor).
Displays the value after electronic gear for position command, current
position, or droop pulses to be monitored (PLC function special register).
Displays the value after electronic gear for position command, current
position, or droop pulses to be monitored (multifunction monitor).
Displays the value after electronic gear for position command, current
position, or droop pulses to be monitored (PLC function special register).
Displays the value before electronic gear for position command, current
position, or droop pulses to be monitored (multifunction monitor).
Displays the value before electronic gear for position command, current
position, or droop pulses to be monitored (PLC function special register).
Multifunction monitor display
Shows the various pulse conditions during
operation as the number of pulses.
Shows the frequency value.
Pulse monitor display
(output frequency displayed)
Description
175
7. Position Control
7.4 Pulse monitor
1
2
3
4
5
6
7
8
9
10