Mitsubishi Electric 800 Series Instruction Manual page 96

5
PARAMETERS
This chapter explains the function setting for use of this product.
Always read this instructions before use.
The following marks are used to indicate the controls as below. (Parameters without
any mark are valid for all control.)
Mark Control method
V/F control
V/F V/F V/F
Advanced magnetic flux
Magnetic flux Magnetic flux Magnetic flux
vector control
Real sensorless vector control
Sensorless Sensorless Sensorless
Vector control
Vector Vector Vector
PM sensorless vector control
PM PM PM
The setting range and the initial value of parameters differ depending on the structure
or functions of the inverter. The following common designations are used for each
type of the inverter models.
Inverter model
FR-A860
FR-A862
Applied motor
Three-phase induction motor
Three-phase induction motor,
PM motor
PM motor
Common designation
Standard model
Separated converter type
95
PARAMETERS
5