Mitsubishi Electric CR750-Q Instruction Manual page 664

7Appendix
■Deleting the path point data
Select a path point data in the path point data list area, and click the right mouse button. The context menu
will open, so click on [Delete]. The selected path point data will be deleted.
(The data can also be deleted by clicking menu [Edit] → [Delete].)
Fig.7-55:Deleting the path point data
■Edit FLG1
Edits the FLG1 value of selected path point at one time. To use this function, the RT ToolBox2 version 3.40S
or later is required.
To batch edit FLG1 values, select the path point data to be edited in the path point data list area, and right-
click. Click [Edit FLG1] in the context menu that appears to display an FLG1 batch editing screen.
(This screen can also be displayed by clicking [Edit] → [Edit FLG1] on the menu.)
Fig.7-56:Edit FLG1 screen
By changing the arm posture construction and clicking the [OK] button, changes are updated to the selected
path point. When the [Cancel] button is clicked, the FLG1 batch editing screen is closed without updating
changes.
Appendix-644 Spline interpolation
[Delete]