Example Of Setting Parameters 3 - Mitsubishi Electric CR750-Q Instruction Manual

5Functions set with parameters

5.15.5 Example of setting parameters 3

(for using the real-time external control function)
An example of the settings for using the real-time external control function is shown below.
Item
Robot controller IP address
Personal computer IP address
Robot controller port No.
Parameter name to
be changed
NETIP
NETPORT
MXTTOUT
MXTCOM1
Next, set the personal computer IP address to 192.168.0.2. Set this value on the Network Properties
screen.
Windows XP (lower left screen), Windows Vista (lower right screen)
The personal computer IP address is set with the Windows TCP/IP Property Network setting (property in
network computer). Because the set-up screen differs with versions of Windows, refer to the manuals
enclosed with Windows, etc., for details on setting this address.
Refer to the instruction manuals enclosed with the personal computer support software for details on setting
and using the personal computer support software.
5-494 About the communication setting (Ethernet)
Setting value
192.168.0.20
192.168.0.2
10000
Before/after change
Before 192.168.0.20
After 192.168.0.20 (With the default value.)
Before 10000,10001,10002,10003,10004,10005,10006,10007,10008,10009
10000,10001,10002,10003,10004,10005,10006,10007,10008,10009
After
(Default value)
Before -1
After -1 (Default value)
Before 192.168.0.2
After 192.168.0.2 (Default value)
Parameter value