Mitsubishi Electric CR750-Q Instruction Manual page 482

5Functions set with parameters
Parameter
Behavior selection CATEGORY
of the [RESET]
key input at the
error occurrence
on dual system
*Available soft-
ware versions
S/W Ver.
F-Q series:
R6b or later
F-D series:
S6b or later
5-462 Operation parameter
Parameter
No. of arrays
name No. of characters
Integer 1
Details explanation
Set the behavior of the [RESET] key input at the error
occurrence on dual system.
3: Enable the error reset
4: Disable the error reset
Target errors are following.
H0039 (Door Switch Signal line is faulty.)
H0046 (Faulty wiring (Enabling Device).)
H0051 (Wiring of the external emergency stop is abnormal.)
Factory setting
3