Mitsubishi Electric CR750-Q Instruction Manual page 40

3Explanation of operation methods
Using the T/B
Unless the controller mode sets "MANUAL", operations other than specific operations (current position
display on JOG screen, changing of override, monitoring of input/output, error history) cannot be carried
out from the T/B.
Function key
There is the menu displayed on the lowest stage of the screen in the white character. These are assigned
to [F1], [F2], [F3], and [F4] key sequentially from the left. The menu currently displayed by pressing the
corresponding function key can be selected.
And, if "=>" is displayed at the right end of the menu, it is shown that there is still the menu other than the
current display, and whenever it presses the [FUNCTION] key, the display menu changes.
<CURRENT> JOINT
J1: 0.00
J2: -0.01
J3: -0.03
J4: 0.00
TOOL
XYZ
3-20
50% M1 TO B1
J5: 0.00
J6: 0.00
:
:
CYLNDR ⇒
123 3-XYZ 3-XYZ
<CURRENT> JOINT
J1:
[FUNCTION]
J2:
J3:
J4:
ADD.AX
50% M1 TO B1
0.00 J5: 0.00
-0.01 J6: 0.00
-0.03 :
0.00 :
⇒
JOG CLOSE 3-XYZ