Name Change Of The Program (Rename) - Mitsubishi Electric CR750-Q Instruction Manual

3Explanation of operation methods

(3) Name change of the program (Rename)

1) Select the rename menu
Press the function key corresponding to the "RENAME" by program list display. Display the rename
screen. If the "renaming" menu is not displayed, press and display the [FUNCTION] key.
<FILE/EDIT> 1/
1 08-04-24 17:20:32 22490
2 08-04-24 14:56:08
A1 08-04-24 13:05:54
B1 08-04-24 13:05:54
RENAME DELETE
2) Specification of the program which changes the name.
In the parenthesis of the renaming source, the program name beforehand selected by the program
list screen is displayed. (The figure the program name "1") If it changes, move the cursor by the arrow
key.
Into the parenthesis of the renaming destination, input the new program name and press the [EXE]
key.
<PROGRAM RENAME>
SRC.NAME ( 1
DST.NAME ( 31
The program name protected cannot be changed.
The program name with which command protection is set up cannot be changed. Please execute after
removing command protection.
3-64 Operating the program control screen
20 Rem 136320
694
2208
1851
CLOSE
123 PRTCT ⇒
)
)
123
CLOSE
<PROGRAM RENAME>
SRC.NAME ( 1
DST.NAME (
123
<FILE/EDIT> 1/ 20 Rem
2 08-04-24 14:56:08
3 08-04-24 13:05:54
4 08-04-24 13:05:54
31 08-04-24 17:20:32
EDIT POSI.
123 NEW
)
)
CLOSE
136320
694
2208
1851
22490
COPY ⇒