Output Register Monitor - Mitsubishi Electric CR750-Q Instruction Manual

3Explanation of operation methods
4) Press the function key corresponding to "CLOSE", and return to the monitor menu screen.
<INPUT REGISTER>
8000
8001
8002
8003
Prev
NUMBER
5) Press the function key corresponding to "CLOSE" in monitor menu screen is pressed, finish the moni-
tor, and return to the original screen.
<MONITOR>
1.INPUT
3.INPUT REG.
5.VARIABLE
Finish the monitor
If the [MONITOR] key is pressed, the monitor will be finished always and it will return to the original screen.

(4) Output register monitor

If CC-Link is used, it is the function which always monitors the value of the output register.
Note) Since there is no CC-Link option in the CR7xx-Q series, this function can not be used.
1) Press the [4] key in the monitor menu screen, and display the output register screen. The output reg-
ister of the 4 registers can be monitored on the one screen.
<MONITOR>
1.INPUT
3.INPUT REG.
5.VARIABLE
123
The case where the state of the output register 8000 is confirmed is shown in the following.
2) Press the function key corresponding to "NUMBER".
Set "8000" as the start number.
<OUTPUT REGISTER>
6000
6001
6002
6003
Prev
NUMBER
3-78 Operating the monitor screen
0 0×0000
0 0×0000
0 0×0000
0 0×0000
123 CLOSE
Next
2.OUTPUT
4.OUTPUT REG.
6.ERROR LOG
123
CLOSE
2.OUTPUT
4.OUTPUT REG.
6.ERROR LOG
CLOSE
0 0×0000
0 0×0000
0 0×0000
0 0×0000
123 Next CLOSE
<MONITOR>
1.INPUT 2.OUTPUT
3.INPUT REG. 4.OUTPUT REG.
5.VARIABLE 6.ERROR LOG
123
<FILE/EDIT> 1/20
1 08-04-24 17:20:32
2 08-04-24 14:56:08
A1 08-04-24 13:05:54
B1 08-04-24 13:05:54
POSI. 123 NEW
EDIT
<OUTPUT REGISTER>
6000 0 0×0000
6001 0 0×0000
6002 0 0×0000
6003 0 0×0000
Prev 123
NUMBER Next
<OUTPUT REGISTER>
START No. （ 8000 ）
OUT.VALUE ( 0 )
0x( 0000 )
123
OUTPUT
CLOSE
Rem 136320
22490
694
2208
1851
COPY ⇒
CLOSE
CLOSE