Parameters Mode - ABB ACS355 User Manual

Parameters mode

In the Parameters mode, you can:
• view and change parameter values
• start, stop, change the direction and switch between local and remote control.
How to select a parameter and change its value
Step Action
1. Go to the Main menu by pressing
Output mode, otherwise by pressing repeatedly
you get to the Main menu.
2. Go to the Parameters mode by selecting PARAMETERS
on the menu with keys
ENTER
.
3. Select the appropriate parameter group with keys
and .
SEL
Press .
4. Select the appropriate parameter with keys
. The current value of the parameter is shown
below the selected parameter.
EDIT
Press .
5. Specify a new value for the parameter with keys
and .
Pressing the key once increments or decrements the
value. Holding the key down changes the value faster.
Pressing the keys simultaneously replaces the displayed
value with the default value.
MENU
if you are in the
EXIT
and , and pressing
and
Control panels 95
Display
LOC MAIN MENU
until
PARAMETERS
ASSISTANTS
CHANGED PAR
EXIT 00:00
LOC PAR GROUPS
01 OPERATING DATA
03 FB ACTUAL SIGNALS
04 FAULT HISTORY
10 START/STOP/DIR
11 REFERENCE SELECT
EXIT 00:00
LOC PAR GROUPS
99 START-UP DATA
01 OPERATING DATA
03 FB ACTUAL SIGNALS
04 FAULT HISTORY
10 START/STOP/DIR
00:00
EXIT
LOC PARAMETERS
9901 LANGUAGE
ENGLISH
9902 APPLIC MACRO
9903 MOTOR TYPE
9904 MOTOR CTRL MODE
EXIT 00:00
LOC PARAMETERS
9901 LANGUAGE
9902 APPLIC MACRO
ABB STANDARD
9903 MOTOR TYPE
9904 MOTOR CTRL MODE
EXIT 00:00
LOC PAR EDIT
9902 APPLIC MACRO
ABB STANDARD
[1]
00:00
CANCEL
LOC PAR EDIT
9902 APPLIC MACRO
3-WIRE
[2]
CANCEL 00:00
1
ENTER
01
SEL
99
SEL
EDIT
EDIT
SAVE
SAVE