Fault Logger Mode - ABB ACS355 User Manual

Fault logger mode

In the Fault logger mode, you can:
• view the drive fault history of maximum ten faults (after a power off, only the three
latest faults are kept in the memory)
• see the details of the three latest faults (after a power off, the details of only the
most recent fault is kept in the memory)
• read the help text for the fault
• start, stop, change the direction and switch between local and remote control.
How to view faults
Step Action
1. Go to the Main menu by pressing
Output mode, otherwise by pressing repeatedly
you get to the Main menu.
2. Go to the Fault logger mode by selecting FAULT
LOGGER on the menu with keys
ENTER
pressing
with the latest fault.
The number on the row is the fault code according to
which the causes and corrective actions are listed in
chapter Fault tracing
3. To see the details of a fault, select it with keys
, and press
4. To show the help text, press
keys and
After reading the help, press
previous display.
. The display shows the fault log starting
on page 335.
DETAIL
.
DIAG
. Scroll the help text with
.
OK
to return to the
MENU
if you are in the
EXIT
until
and , and
and
Control panels 101
Display
LOC MAIN MENU
PARAMETERS
ASSISTANTS
CHANGED PAR
00:00 ENTER
EXIT
LOC FAULT LOGGER
10: PANEL LOSS
19.03.05 13:04:57
6: DC UNDERVOLT
7: AI1 LOSS
EXIT 00:00 DETAIL
LOC PANEL LOSS
DI STATUS AT FLT
00000 bin
FAULT TIME 1
13:04:57
FAULT TIME 2
EXIT 00:00 DIAG
LOC DIAGNOSTICS
Check: comm lines
and connections,
parameter 3002,
parameters in groups
10 and 11.
00:00
EXIT
1
1
OK