ABB ACS355 User Manual page 110

110 Application macros
Macro
Hand/Auto
PID control
Torque control
User
Suitable applications
Speed control applications where switching between two control devices is
needed. Some control signal terminals are reserved for one device, the
rest for the other. One digital input selects between the terminals (devices)
in use.
Process control applications, for example different closed loop control
systems such as pressure control, level control and flow control. It is
possible to switch between process and speed control: Some control
signal terminals are reserved for process control, others for speed control.
One digital input selects between process and speed control.
Torque control applications. It is possible to switch between torque and
speed control: Some control signal terminals are reserved for torque
control, others for speed control. One digital input selects between torque
and speed control.
The user can save the customized standard macro, ie the parameter
settings including group
identification run into the permanent memory, and recall the data at a later
time.
For example, three user macros can be used when switching between
three different motors is required.
99 START-UP DATA, and the results of the motor