ABB ACS355 User Manual page 201

All parameters
No. Name/Value
TIMED FUNC 3 Timed function 3 is active. See parameter group
TIMED FUNC 4 Timed function 4 is active. See parameter group
M.TRIG FAN
M.TRIG REV
M.TRIG RUN
M.TRIG MWH
SEQ PROG
MBRK
JOG ACTIVE
STO
STO(-1)
1402 RELAY
OUTPUT 2
1403 RELAY
OUTPUT 3
1404 RO 1 ON
DELAY
0.0...3600.0 s
1405 RO 1 OFF
DELAY
0.0...3600.0 s
Description
FUNCTIONS.
FUNCTIONS.
Cooling fan running time counter is triggered. See
parameter group 29 MAINTENANCE
Revolutions counter is triggered. See parameter group
MAINTENANCE TRIG.
Run time counter is triggered. See parameter group
MAINTENANCE TRIG.
MWh counter is triggered. See parameter group
MAINTENANCE TRIG.
Relay output control with Sequence programming. See
parameter 8423 ST1 OUT
On/Off control of a mechanical brake. See parameter group
43 MECH BRK CONTROL.
Jogging function active. See parameter
SEL.
STO (Safe torque off) has been triggered.
STO (Safe torque off) is inactive and the drive operates
normally.
See parameter 1401 RELAY OUTPUT
the MREL-01 relay output extension module is connected to
the drive.
See parameter 1401 RELAY OUTPUT
the MREL-01 relay output extension module is connected to
the drive.
Defines the operation delay for relay output RO 1.
Delay time. The figure below illustrates the operation (on)
and release (off) delays for relay output RO.
Control event
Relay status
1404
Defines the release delay for relay output RO 1.
Delay time. See the figure for parameter
DELAY.
Actual signals and parameters 201
TRIG.
CONTROL.
1010 JOGGING
1. Available only if
1. Available only if
On delay 1405
1404 RO 1 ON
Def/FbEq
36 TIMED 39
36 TIMED 40
41
29 42
29 43
29 44
50
51
52
57
58
NOT SEL
NOT SEL
0.0 s
1 = 0.1 s
Off delay
0.0 s
1 = 0.1 s