Analog Outputs - ABB ACS355 User Manual

202 Actual signals and parameters
All parameters
No. Name/Value
1406 RO 2 ON
DELAY
1407 RO 2 OFF
DELAY
1408 RO 3 ON
DELAY
1409 RO 3 OFF
DELAY
1410 RELAY
OUTPUT 4
1413 RO 4 ON
DELAY
1414 RO 4 OFF
DELAY
15 ANALOG
OUTPUTS
1501 AO1
CONTENT SEL
x...x
1502 AO1
CONTENT MIN
x...x
1503 AO1
CONTENT
MAX
x...x
1504 MINIMUM AO1 Defines the minimum value for the analog output signal AO.
0.0...20.0 mA
Description
See parameter 1404 RO 1 ON
See parameter 1405 RO 1 OFF
See parameter 1404 RO 1 ON
See parameter 1405 RO 1 OFF
See parameter 1401 RELAY OUTPUT
the MREL-01 relay output extension module is connected to
the drive.
See parameter 1404 RO 1 ON
See parameter 1405 RO 1 OFF
Selection of the actual signals to be indicated through
analog output and output signal processing.
Connects a drive signal to analog output AO.
Parameter index in group
0102 SPEED.
Defines the minimum value for the signal selected with
parameter 1501 AO1 CONTENT
AO minimum and maximum correspond to the
MINIMUM AO1 and 1505 MAXIMUM AO1
follows:
AO (mA)
1505
1504
1502 1503
Setting range depends on the parameter
CONTENT SEL setting.
Defines the maximum value for the signal selected with
parameter 1501 AO1 CONTENT
parameter 1502 AO1 CONTENT
Setting range depends on the parameter
CONTENT SEL setting.
See the figure for parameter
Minimum value
DELAY.
DELAY.
DELAY.
DELAY.
1. Available only if
DELAY.
DELAY.
01 OPERATING DATA. Eg 102 =
SEL.
settings as
AO (mA)
1505
1504
1503
AO
content
1501 AO1
SEL. See the figure for
MIN.
1501 AO1
1502 AO1 CONTENT
Def/FbEq
0.0 s
0.0 s
0.0 s
0.0 s
NOT SEL
0.0 s
0.0 s
103
-
1504
AO
1502
content
-
-
-
0.0 mA
MIN.
1 =
0.1 mA