ABB ACS355 User Manual page 323

Bit Name
12 PANEL_LOCAL
13 FIELDBUS_LOCAL
14 EXT2_ACT
15 FAULT
Bit Name
16 ALARM
17 NOTICE
18 DIRLOCK
19 LOCALLOCK
20 CTL_MODE
21 JOGGING ACTIVE
22... Reserved
25
26 REQ_CTL
27 REQ_REF1
28 REQ_REF2
29 REQ_REF2EXT
30 ACK_STARTINH
31 Reserved
DCU profile Status word, parameter
Value Status
1 Control is in control panel (or PC tool) local mode.
0 Control is not in control panel local mode.
1 Control is in fieldbus local mode
0 Control is not in fieldbus local mode.
1 Control is in EXT2 mode.
0 Control is in EXT1 mode.
1 Drive is in a fault state.
0 Drive is not in a fault state.
DCU profile Status word, parameter
Value Status
1 An alarm is on.
0 No alarms are on.
1 A maintenance request is pending.
0 No maintenance request
1 Direction lock is ON. (Direction change is locked.)
0 Direction lock is OFF.
1 Local mode lock is ON. (Local mode is locked.)
0 Local mode lock is OFF.
1 Drive is in vector control mode.
0 Drive is in scalar control mode.
1 Jogging function is active.
0 Jogging function is not active.
1 Control word requested from fieldbus
0 No operation
1 Reference 1 requested from fieldbus
0 Reference 1 is not requested from fieldbus.
1 Reference 2 requested from fieldbus
0 Reference 2 is not requested from fieldbus.
1 External PID reference 2 requested from fieldbus
0 External PID reference 2 is not requested from
fieldbus.
1 Start inhibit from fieldbus
0 No start inhibit from fieldbus
Fieldbus control with embedded fieldbus 323
0303 FB STS WORD 1
0304 FB STS WORD 2