Contents Of The Assistant Displays - ABB ACS355 User Manual

124 Program features
Name
Start/Stop control
Protections
Output signals
Timed functions

Contents of the assistant displays

There are two types of displays in the Start-up assistant: Main displays and
information displays. The main displays prompt the user to feed in information. The
assistant steps through the main displays. The information displays contain help texts
for the main displays. The figure below shows a typical example of both and
explanations of the contents.
Main display
REM PAR EDIT
9905 MOTOR NOM VOLT
1
220 V
2
CANCEL
1 Parameter
2 Feed-in field
Description
Selecting the source for start and stop
signals of the two external control
locations, EXT1 and EXT2
Selecting between EXT1 and EXT2
Defining the direction control
Defining the start and stop modes
Selecting the use of Run enable signal
Setting the current and torque limits
Selecting the signals indicated through
relay output RO1 and, if MREL-01 relay
output extension module is in use,
RO2...RO4.
Selecting the signals indicated through
analog output AO
Setting the minimum, maximum, scaling
and inversion
Setting the timed functions
Selecting the timed start/stop control for
external control locations EXT1 and EXT2
Selecting timed EXT1/EXT2 control
Activation of timed constant speed 1
Selecting timed function status indicated
through relay output RO1 or, if MREL-01
relay output extension module is in use,
RO2...RO4.
Selecting timed PID1 parameter set 1/2
control
00:00 SAVE
Information display
LOC HELP
Set exactly as given
on the motor
nameplate
If connected to
multiple motors
EXIT 00:00
Help text ...
... help text continued
Set parameters
1001, 1002
1102
1003
2101...2103
1601
2003, 2017
Group 14 RELAY
OUTPUTS
Group 15 ANALOG
OUTPUTS
36 TIMED FUNCTIONS
1001, 1002
1102
1201
1401...1403, 1410
4027