ABB ACS355 User Manual page 216

216 Actual signals and parameters
All parameters
No. Name/Value
2008 MAXIMUM
FREQ
0.0...600.0 Hz
2013 MIN TORQUE
SEL
MIN TORQUE
1
DI1
DI2
DI3
DI4
DI5
COMM
DI1(INV)
DI2(INV)
DI3(INV)
DI4(INV)
DI5(INV)
2014 MAX TORQUE
SEL
MAX TORQUE
1
DI1
DI2
DI3
DI4
DI5
Description
Defines the maximum limit for the drive output frequency.
Maximum frequency
Selects the minimum torque limit for the drive.
Value defined by parameter
Digital input DI1. 0 = parameter
value. 1 = parameter
See selection DI1.
See selection DI1.
See selection DI1.
See selection DI1.
Fieldbus interface as the source for the torque limit 1/2
selection, ie control word
The control word is sent by the fieldbus controller through
the fieldbus adapter or embedded fieldbus (Modbus) to the
drive. For the control word bits, see section
communication profile
Minimum torque limit 1 is defined by parameter
TORQUE 1 and minimum torque limit 2 is defined by
parameter 2016 MIN TORQUE
Note: This setting applies only for the DCU profile.
Inverted digital input DI1. 1 = value of parameter
TORQUE 1 1. 0 = value of parameter
2.
See selection DI1(INV).
See selection DI1(INV).
See selection DI1(INV).
See selection DI1(INV).
Selects the maximum torque limit for the drive.
Value of parameter 2017 MAX TORQUE 1
Digital input DI1. 0 = parameter
value. 1 = parameter
See selection DI1.
See selection DI1.
See selection DI1.
See selection DI1.
2015 MIN TORQUE 1
2015 MIN TORQUE 1
2016 MIN TORQUE 2
0301 FB CMD WORD 1
on page 320.
2.
2016 MIN TORQUE
2017 MAX TORQUE 1
2018 MAX TORQUE 2
Def/FbEq
E: 50.0 Hz
U: 60.0 Hz
1 = 0.1 Hz
MIN
TORQUE
1
0
1
value.
2
3
4
5
7
bit 15.
DCU
2015 MIN
2015 MIN -1
-2
-3
-4
-5
MAX
TORQUE
1
1
value.
2
3
4
5