Parameters Mode - ABB ACS5000 User Manual

9.2.3

Parameters mode

▲
NOTICE
Risk of component damage.
Running the drive system with incorrect data can result in improper
operation, reduction of control accuracy and damage of equipment.
• Parameters must only be set by qualified personnel.
• DO NOT change any parameter, if the meaning of the parameter and
the effects of the change are not fully understood.
(1) Status line
(2) Group number and name
(3) Parameter number and name
(4) Parameter value
(5) Selection key for
parameters mode
3BHS799208 E01 REV E
1
1 L ->
77 SYSTEM CONFIG
2
01 INU IdentifySel
3
INU1 (MASTER)
4
5
6
Figure 9-3 Control panel functions for Parameters mode
ACS5000 WATER-COOLED USER MANUAL
600.0 rpm
(6) Fast navigation key for selecting a
parameter group (and a parameter
value)
(7) Slow navigation key for selecting a
parameter (and a parameter value)
(8) Enter key for confirming
the selection
09 CDP CONTROL PANEL
7
8
149/186