52 Panel Comm - ABB ACS355 User Manual

All parameters
No. Name/Value
TIME OUT
CONFIG
ERROR
OFF-LINE
ON-LINE
RESET
5132 FBA CPI FW
REV
5133 FBA APPL FW
REV

52 PANEL COMM

5201 STATION ID
1...247
5202 BAUD RATE
1.2 kb/s
2.4 kb/s
4.8 kb/s
9.6 kb/s
19.2 kb/s
38.4 kb/s
57.6 kb/s
115.2 kb/s
5203 PARITY
8 NONE 1
8 NONE 2
Description
A time-out has occurred in the communication between the
adapter and the drive.
Adapter configuration error: The major or minor revision
code of the common program revision in the fieldbus
adapter module is not the revision required by the module
(see parameter 5132 FBA CPI FW
upload has failed more than three times.
Adapter is off-line.
Adapter is on-line.
Adapter is performing a hardware reset.
Displays the common program revision of the adapter
module in format axyz, where:
• a = major revision number
• xy = minor revision numbers
• z = correction letter.
Example: 190A = revision 1.90A
Common program revision of the adapter module
Displays the application program revision of the adapter
module in format axyz, where:
• a = major revision number
• xy = minor revision numbers
• z = correction letter.
Example: 190A = revision 1.90A
Application program revision of the adapter module
Communication settings for the control panel port on the
drive
Defines the address of the drive. Two units with the same
address are not allowed on-line.
Address
Defines the transfer rate of the link.
1.2 kbit/s
2.4 kbit/s
4.8 kbit/s
9.6 kbit/s
19.2 kbit/s
38.4 kbit/s
57.6 kbit/s
115.2 kbit/s
Defines the use of parity and stop bit(s). The same setting
must be used in all on-line stations.
8 data bits, no parity bit, one stop bit
8 data bits, no parity bit, two stop bits
Actual signals and parameters 277
REV) or mapping file
Def/FbEq
2
3
4
5
6
1 = 1
1 = 1
1
1 = 1
9.6 kb/s
1 =
0.1 kbit/s
8 NONE 1
0
1