Settings; Timer; Diagnostics; Counter - ABB ACS355 User Manual

Settings

Parameter
36 TIMED FUNCTIONS
1001, 1002
1102
1201
1209
1401
1402/1403/1410
1805
4027
4228
8402
8425/8435/.../8495
8426/8436/.../8496

Timer

Drive start and stop can be controlled with timer functions.
Settings
Parameter
1001, 1002
Group 19 TIMER & COUNTER

Diagnostics

Actual signal
0165

Counter

Drive start and stop can be controlled with counter functions. The counter function
can also be used as state change trigger signal in Sequence programming. See
section Sequence programming
Settings
Parameter
1001, 1002
Group 19 TIMER & COUNTER
8425, 8426 / 8435, 8436 /.../8495,
8496
Additional information
Timed functions settings
Timed start/stop control
Timed EXT1/EXT2 selection
Timed constant speed 1 activation
Timed speed selection
Timed function status indicated through relay output RO 1
Timed function status indicated through relay output RO 2...4.
With option MREL-01 only.
Timed function status indicated through digital output DO
Timed PID1 parameter set 1/2 selection
Timed external PID2 activation
Timed Sequence programming activation
Sequence programming state change trigger with timed
function
Additional information
Start/stop signal sources
Timer for start and stop
Additional information
Start/stop control time count
on page 166.
Additional information
Start/Stop signal sources
Timer for start and stop
Counter signal as state change trigger in Sequence
programming
Program features 165