Assigning A Program Channel To A Pe (Program Entry) - Cisco D9854 Installation And Configuration Manual

Assigning a Program Channel to a PE (Program
Entry)
1 At the start-up screen, PE1 is initially displayed.
2 Press ADV and use the
3 Press ADV again to select the channel number.
4 Use the
enter the channel number using the 0 to 9 keys; press SELECT to save the
channel selection.
Important: In addition to ASI out availability on all models, your unit will be
configured for either HD-SDI or MOIP output. Please follow the procedure for your
model to configure the outputs.
keys to scroll through the available program entries.
keys to scroll through the available program channels or directly

Assigning a Program Channel to a PE (Program Entry)

19