Settings; Interface Tab - Honeywell 7561-PSDS User Manual

MODEL 7561-PSDS
PORTABLE SENSOR DISPLAY – STRAIN BRIDGE

Settings

This page allows the user to alter the device settings.

Interface Tab

Figure 26. Interface Tab Screen
On this page, the user can configure the user interface of the handheld and change
settings of the backlight and keypad.
TABLE 11. SETTINGS SCREEN
Item
Backlight
Mode drop-down
Duration(s) entry field
Brightness slider
Auto-Off
Enabled switch
Duration (minutes) entry
field
Description
Select the required operational mode for the backlight.
Choices are:
Off - The backlight remains off
On - The backlight is on all the while the handheld is
turned on
Auto - The backlight will come on when a key is
pressed and turn off again if no key is pressed
for the duration set below
Set the time to wait without a key press before the
backlight turns off. Only applies if Mode is set to Auto
Change backlight brightness. Move the slider to set the
desired backlight brightness level. A brighter backlight
will result in lower battery life
Set to ON to automatically turn off the handheld if keys
are not pressed for a specified duration
Set the time to wait without a key press before the
backlight turns off. Only applies if Auto-Off is enabled
Model 7561-PSDS User Manual |
Issue A
008-0752-00
sps.honeywell.com/ast | 36