Editing Parameter Values; Editing Numeric Values - Honeywell 7561-PSDS User Manual

MODEL 7561-PSDS
PORTABLE SENSOR DISPLAY – STRAIN BRIDGE

Editing Parameter Values

Some menu items allow you to edit/enter a numeric value or text..

Editing Numeric Values

The following example screen shows what would be displayed for editing the Alarm
Low level.
Figure 14. Alarm Low Level Screen
The text at the top right states the engineering units of the value being entered. The
text at the top inside the box states what parameter is currently being edited.
One of the digits will be the current selection, and this digit will flash alternatively
displaying its character and an underlined space.
TABLE 6. EDITING NUMERIC VALUES
Key
The soft keys at the bottom will (where appropriate) allow the user to
+/-
<DP
DP>
,
NOTE
Pressing and holding the OK key for over a second then releasing will cancel the
current edit.
Function
These keys are used to change the currently
selected (flashing digit or character)
These keys will increment or decrement the
currently selected digit. In the case of text the
letters of the alphabet will be cycled through
Toggle the sign between positive and negative
Move the decimal place to the left
Move the decimal place to the right
Click the OK key to stop editing and save the
value
Model 7561-PSDS User Manual |
Issue A
008-0752-00
sps.honeywell.com/ast | 26