Units Tab - Honeywell 7561-PSDS User Manual

MODEL 7561-PSDS
PORTABLE SENSOR DISPLAY – STRAIN BRIDGE

Units Tab

Figure 35. Units Tab Screen
This section allows the user to define which units of measure are available for
calibration. This includes base engineering units and also any unit conversions that
are selectable from the Units soft key that appears on most display modes.
Two lists are displayed. The left one shows all available units that are not currently
enabled, and the one on the right shows the units that are available for calibrating or
conversion.
To change items between the two lists, simply select one or more items (Hold CTRL
keyboard key to select multiple items) and click the appropriate arrow symbol.
When the user uses the Units soft key to cycle around selected units, the list will be
limited to those that are relevant to the calibrated base units.
Each unit has a definable display format that sets the desired number of decimal
places shown. The format can be changed by right clicking the field in the Decimal
Places column and selecting the desired format from the pop-up list.
Note: the decimal places can also be modified (globally for the currently displayed
engineering units) by using a long press on the keypad left and right direction keys (If
this action has been allowed).
Model 7561-PSDS User Manual |
Issue A
008-0752-00
sps.honeywell.com/ast | 47