Custom Units Tab - Honeywell 7561-PSDS User Manual

MODEL 7561-PSDS
PORTABLE SENSOR DISPLAY – STRAIN BRIDGE

Custom Units Tab

Figure 36. Custom Units Tab Screen
If the comprehensive list of built in units and automatic conversion does not contain
the engineering units the user needs, this tab allows creation of his/her own.
You can create up to four units with a gain factor for each to allow conversion between
them.
See the Engineering Units section for a list of supported unit categories and units.
Notice the four custom units at the end of the table. These are selectable as either
calibrated or available display units. The conversion factors used and the description
shown will come from the data entered here.
TABLE 17. CUSTOM UNITS
Item
Index label
Name entry field
Gain entry field
Description
Indicates the index of the custom unit
Enter the text to be displayed for this custom unit.
i.e. kg, lbs etc.
Enter a gain value for this custom unit. The gain value
indicates how to convert between the different custom
units. For example, if trying to enter mass units and
wanted kg and lbs, the user could enter kg in index 1
with a gain of 1 and lbs in index 2 with a gain of 2.2
Model 7561-PSDS User Manual |
Issue A
008-0752-00
sps.honeywell.com/ast | 48