Measurement - Honeywell 7561-PSDS User Manual

MODEL 7561-PSDS
PORTABLE SENSOR DISPLAY – STRAIN BRIDGE

Measurement

Figure 43. Measurement Tab Screen
This page allows the user to change the measurement settings. It is also presented
in a way to visually represent how the parameters interact to generate the various
dynamic result values. Each calibration range has its own set of these parameters,
and they will be remembered the next time the calibration range is selected again.
TABLE 23. MEASUREMENT SCREEN
Item
Calibration range drop
down
Description
Select from the available calibration ranges. Some may
have been disabled from the Configuration settings.
Note: the handheld will be switched to the selected
range as if the user had selected the range using the
keypad.
Note: selection of this calibration range will select
the actual range that the Live Values are referring to
and will also set what the System Zero, Zero Masking,
Resolution and Scale Steady settings refer to i.e., these
settings are independent for each internal Calibration
Range
Model 7561-PSDS User Manual |
Issue A
008-0752-00
sps.honeywell.com/ast | 57