Introduction/Overview - Honeywell 7561-PSDS User Manual

MODEL 7561-PSDS
PORTABLE SENSOR DISPLAY – STRAIN BRIDGE

Introduction/Overview

The PSDS (Portable Sensor Display) product group is a range of hand-held
instrumentation which will cover different sensor types in the future.
The PSDS (Portable Sensor Display Standard) for strain bridge sensors is a
microprocessor based portable display instrument designed to interface with any full
bridge sensor with an output sensitivity of up to 480 mV/V. Bridge resistances from
85 ohms upwards can be used with the PSD.
This module can be either used as a handheld device or, using the optional mounting
accessories, or attached to equipment, dashboards, walls, or desks.
Configuration and calibration of the PSD is achieved using the free PC Toolkit
software and also limited configuration and two-point calibration via the front panel
keypad menu system. User functions available on the PSD include:
• Range selection
• Display hold/freeze
• Gross/Net indication selection
• Peak hold selection
• Trough hold selection
• TEDS support
The PSD is powered by two internal non-rechargeable AA alkaline batteries and can
also be USB powered.
Model 7561-PSDS User Manual |
Issue A
008-0752-00
sps.honeywell.com/ast | 5