Editing Text - Honeywell 7561-PSDS User Manual

MODEL 7561-PSDS
PORTABLE SENSOR DISPLAY – STRAIN BRIDGE

Editing Text

The following example screen shows what would be displayed for editing the name of
a calibration range.
Figure 15. Editing Name of Calibration Range
The text at the top inside the box states what parameter is currently being edited.
One of the characters will be the current selection and this character will flash
alternatively displaying its character and an underlined space.
TABLE 7. EDITING TEXT
Key
The soft keys at the bottom will (where appropriate) allow the user to
DEL
INS
A0!
,
NOTE
Pressing and holding the OK key for over a second then releasing will cancel the
current edit.
Function
These keys are used to change the currently
selected (flashing digit or character)
These keys will increment or decrement the
currently selected digit. In the case of text the
letters of the alphabet will be cycled through
Delete the current character selection
Insert another character to the left of the flashing
cursor
Cycle between character modes. Alpha, numeric
and symbol
Click the OK key to stop editing and save the
value
Model 7561-PSDS User Manual |
Issue A
008-0752-00
sps.honeywell.com/ast | 27