Export Tab - Clone Export - Honeywell 7561-PSDS User Manual

MODEL 7561-PSDS
PORTABLE SENSOR DISPLAY – STRAIN BRIDGE

Export Tab - Clone Export

Figure 30. Export Tab Screen
Clone Export is an advanced form of export that offers the ability to export data that
may be locked and protected by a password. It also allows passwords to be encrypted
into the exported file and get applied to the freshly cloned device when imported.
When creating the Clone Export file, an optional password may be supplied to
automatically apply protection to the cloned device when imported.
m
NOTE
It is important that these passwords are not forgotten. Resetting of a forgotten
password will require proof of access rights and may require a return to supplier and
may incur additional cost.
If the connected device has a password locked calibration or configuration section
then the same passwords must be entered to proceed.
Summary: To successfully create a Clone Export, the connected device must be
unlocked or the passwords known for those locked sections. If a section is currently
unlocked, then a password may be supplied at this point to be automatically applied
to the cloned device later.
TABLE 15. CLONED EXPORT SCREEN
Item
Back button
Clone Export button
Description
Go back to standard export page
Export Clone configuration to a file on the PC. This will
open a file dialog box to allow the user to specify where
the export will be saved
Model 7561-PSDS User Manual |
Issue A
008-0752-00
sps.honeywell.com/ast | 41