Go/No Go - Honeywell 7561-PSDS User Manual

MODEL 7561-PSDS
PORTABLE SENSOR DISPLAY – STRAIN BRIDGE

Go/No Go

This is a very useful display mode for use in conjunction with the Alarm Limits values.
The display simply shows PASS when the value is between those limits and FAIL if the
value is outside those limits..
Figure 11. Display - Go/No Go
The High limit, Low limit, and actual Value are displayed beneath.
Soft keys allow for the user to toggle between Zero and Gross and the Units can be
selected.
,
NOTE
As there is only one global alarm, set in the base units of the current selected
calibration range, the user must ensure that the correct calibration range is selected
and that the Alarm Latch is not active!
Model 7561-PSDS User Manual |
Issue A
008-0752-00
sps.honeywell.com/ast | 17