Icons - Honeywell 7561-PSDS User Manual

MODEL 7561-PSDS
PORTABLE SENSOR DISPLAY – STRAIN BRIDGE

Icons

The set of icons displayed along the top left of the display is common to all display
modes and have the following meanings.
TABLE 4. ICONS
Icon Description
A warning is detected. Further investigation of the warning may be required
either via the keypad or software. Also displayed when an alarm is triggered
Battery is low
The keypad has been locked because a critical process is being performed
by the Toolkit or other software
The measurement system is operating in 4-wire mode instead of 6-wire
mode. (This feature is only available in certain versions and is not available
to change by the user.)
The main display is showing the Net value because a Tare has been
executed
The temperature is now too low to operate the LCD at its normal
update rate. A slower update rate has been applied. Note that internal
measurement (such as peak detection) will not be affected
External USB power has been applied
Shunt calibration mode is in operation
The Scale Steady functionality is active, but the reading is not steady
A TEDs device is detected as being connected.
The TEDs device is using an internal calibration range rather that its own
calibration table
Model 7561-PSDS User Manual |
Issue A
008-0752-00
sps.honeywell.com/ast | 18