Table of Contents
Advertisement
MODEL 7561-PSDS
PORTABLE SENSOR DISPLAY – STRAIN BRIDGE
Menu Structure
MENU
|
|
|-SYSTEM u
| |
| |-DISPLAY
| | |-CONTRAST u
| | | |-INCREASE
| | | |-DECREASE
| | |-BACKLIGHT u
| | | |-INCREASE
| | | |-DECREASE
| | | |-MODE u
| | | | |-—OFF
| | | | |-—ON
| | | | |-—AUTO
| | | |
| | | |
| | | |-DURATION———
| | |
| | |-AUTO-OFF u
| |
|
| |
|-MODE u
| |
| |- —DISABLED
| |
| |- —ENABLED
| |
|-TIMEOUT———
| |
| |
| |-USER INTERFACE u
| | |-KEY ACTIONS u
| | | |
| | | |-— NONE
| | | |-— BEEP
| | |-KEYS UP/DOWN u
| | | |
| | | |-—RANGE SELECTION
| | | |
| | | |-—DISPLAY SELECTION
| | | |-—DECIMAL PLACES
| | | |
| | | |-—DISABLED
| | |-KEYS LEFT/RIGHT u
| | | |
| | | |-—RANGE SELECTION
| | | |
| | | |-—DISPLAY SELECTION
| | | |-—DECIMAL PLACES
| | | |
| | | |-—DISABLED
| | |-LONG UP/DOWN u
| | | |
| | | |
Menu is activated by holding the OK key for 1 second
System menu contains settings for display and user interface and
other system wide settings
Handles settings for the display and backlight
Allows the LCD contrast to be configured.
Instantly increases LCD contrast
Instantly decreases LCD contrast
Allows the backlight settings to be configured
Instantly increases brightness
Instantly decrease brightness
Select this item to choose the backlight operation mode
Backlight is always off
Backlight is always on
Backlight is on, but will turn off after a certain duration
when no keys are pressed. Any key press will turn the backlight
on again
If Backlight Mode is set to Auto, this sets the duration after which
the backlight will turn off
Controls whether the handheld turns itself off after a duration
without key presses
Select Auto Off mode of operation
Disable Auto Off
Enable Auto Off
Display and edit the duration before the handheld turns off without
a key press, when Auto Off is enabled. (Only visible when mode is
enabled.)
Allows changes to be made to the way the user interface behaves
Select this item to choose what feedback occurs when a valid key
press is detected
No feedback
The sounder will issue a beep
Select this item to choose the action when the up and down keys
are pressed (when not in the menu)
Select the next Calibration Range
Select the next Display Mode
Increase or decrease the number of decimal places displayed for
all displayed values using the same units as the main display
No action
Select this item to choose the action when the left and right keys
are pressed (When not in the menu)
Select the next Calibration Range (Only for non-TEDS devices)
Select the next Display Mode
Increase or decrease the number of decimal places displayed for
all displayed values using the same units as the main display
No action
Select this item to choose the action when the up and down keys
are pressed and released after around one second (when not in the
menu)
Model 7561-PSDS User Manual |
Issue A
008-0752-00
sps.honeywell.com/ast
| 21
Advertisement
Table of Contents
