Table of Contents
Advertisement
MODEL 7561-PSDS
PORTABLE SENSOR DISPLAY – STRAIN BRIDGE
Default Display Modes
The handheld comes with a set of default Display Modes, but the user can swap them.
There are up to six available from a Toolkit library. The library of Display Modes will be
added to with new releases of the Toolkit or may be available for download from our
web site.
Simple Mode
Used only when want a simple single displayed value is wanted.
Figure 6. Display - Simple Mode
The current calibration range is displayed in the top right and Gross or Net is
displayed above the main value. Current units are displayed above, right of the main
value.
Soft keys allow the user to select from alternative units as well as to switch between
Gross and a zeroed Net value. The state of Gross or Net is displayed to the left above
the main value.
Cumulative Zeroing
Similar to simple mode, Cumulative Zeroing has the advantage of being continuously
able to zero the main display whilst still viewing the Gross value.
Figure 7. Display - Cumulative Zeroing
The Gross value and the value of Tare are continuously displayed under the main
value. Soft keys allow the user to Zero the main display, switch back to full Gross value,
or change displayed units.
Model 7561-PSDS User Manual |
Issue A
008-0752-00
sps.honeywell.com/ast
| 15
Advertisement
Table of Contents
