Table of Contents
Advertisement
MODEL 7561-PSDS
PORTABLE SENSOR DISPLAY – STRAIN BRIDGE
TABLE 3. KEYPAD FUNCTIONS
Key
Display
The PSDS has a monochrome dot-matrix backlit display. The display may change
depending on the display mode. However, the basic operation and positions of items
should remain intuitive.
The example shown in Figure 5 allows up to three values to be displayed: one is a
large, primary value with two secondary values.
Figure 5. Display
The values for the main, secondary, and tertiary items are not indicated on the above
diagram to improve clarity.
Other modes such as the menu or editing values will be shown in the appropriate
sections of the manual.
Function
When not in a menu, the Left/Right keys can
perform one of a few user-definable functions,
but the default is to cycle through all available
display modes.
In both the menu and the toolkit, the user may
also select an action for a long press. A long press
is when the key is held down for over a second
before being released.
The OK key is used to open the menu (if that
has been allowed in the configuration), to select
menu items, and complete editing sessions.
The OK key can also be held down for a long press
(approx one second then released) to cancel any
current editing of values and data.
Model 7561-PSDS User Manual |
Issue A
008-0752-00
sps.honeywell.com/ast
| 14
Advertisement
Table of Contents
