Honeywell 7561-PSDS User Manual page 56

MODEL 7561-PSDS
PORTABLE SENSOR DISPLAY – STRAIN BRIDGE
TABLE 22. LOGGING SCREEN
Item
Measure Time switch
Measure Value switch
Show Min./Max. switch
Load Log File button
Clear Chart button
Reset View button
Back to Real-time Chart
button
Description
Select whether to display the on chart tool for mea-
suring the time between two horizontal points on the
chart. This is made much easier if the chart is paused.
Off - Nothing is displayed
On - The Measure Time tool is displayed..
A vertical shaded box will appear and the sides
can be dragged with the mouse to cover the
desired part of the chart. The start and end
timestamps along with the actual duration is
then displayed
Select whether to display the on chart tool for
measuring the value between two vertical points on the
chart. This is made much easier if the chart is paused.
Off - Nothing is displayed
On - The Measure Value tool is displayed. A
horizontal shaded box will appear and the top
and bottom can be dragged with the mouse
to cover the desired part of the chart. The min
and max values along with the actual difference
between the two are displayed
Select whether to show lines to indicate the minimum
and maximum value in the chart data
Off - Nothing is displayed
On - Min and max (Of the currently viewed data)
lines are shown in red and green respectively
Opens a file dialog to allow the user to select a
previously logged data file. This file data will be loaded
into the chart and can be viewed with all the tools
available.
The button caption will change to Back To Real-time
Chart after the file has loaded
Clear all data from the chart
Returns the chart to its default view and zoom level
after zooming or panning the chart
This is what the caption of the Load Log File button
changes to while a logged file is opened in the chart.
Clicking the button will revert the chart to showing
real-time data
Model 7561-PSDS User Manual |
Issue A
008-0752-00
sps.honeywell.com/ast | 56