Clone Export File - Honeywell 7561-PSDS User Manual

MODEL 7561-PSDS
PORTABLE SENSOR DISPLAY – STRAIN BRIDGE

Clone Export File

To successfully import a Clone Export file, either the calibration and/or configuration
sections must be unprotected in the connected device. The passwords encrypted in
the data file must match those in the protected sections of the connected device.
After selecting the file the toolkit will inform the user whether the data can be
imported. If it can, the user can chose to click the Import button to perform the
cloning action.
When cloning a handheld, all configuration, user calibration, and user settings are
duplicated leaving only the original factory settings and factory calibration intact.
m
NOTE
If the Clone Export file contains encrypted passwords to protect either the
calibration or configuration sections, then it must be understood that those
sections will become locked in the connected device once the data file is imported.
There is no way to unlock a protected section if the password is unknown (Resetting
of a forgotten password will require proof of right to access and may require a return
to supplier and incur additional cost.). Be sure that the source of the Clone data file
is trusted or that the passwords are known. (It is normal for a provider of a locked
down device to provide a Clone data file that can update that device.)
TABLE 16. CLONED EXPORT FILE
Item
Select File button
Import button
Description
Click to open a file select dialog box to allow the user to
choose the location of the file to import
Perform the import
Model 7561-PSDS User Manual |
Issue A
008-0752-00
sps.honeywell.com/ast | 43