Calibration Types; Gain And Offset - Honeywell 7561-PSDS User Manual

MODEL 7561-PSDS
PORTABLE SENSOR DISPLAY – STRAIN BRIDGE

Calibration Types

Depending on the calibration type chosen, the process of actual calibration will differ.
See the sections below.

Gain and Offset

This calibration type consists of a single gain and offset applies to all input values.
It consists of one calibration point.
Figure 46. Calibration Screen
Click into the field in the table on the right to set the Offset and Gain.
TABLE 26. GAIN OFFSET SCREEN
Item
NO header
Offset edit field
Gain edit field
Description
This simply indicates which calibration point the row
refers to. In this case there is only ever one point
Click and enter the required offset value
Click and enter the required gain value
Model 7561-PSDS User Manual |
Issue A
008-0752-00
sps.honeywell.com/ast | 63