Import/Export; Export Tab - Honeywell 7561-PSDS User Manual

MODEL 7561-PSDS
PORTABLE SENSOR DISPLAY – STRAIN BRIDGE

Import/Export

This page allows the user to export the settings from the connected device for later
import into the same, or another, device. Depending on whether certain sections are
locked, and the ability to export may not be allowed.
There are two ways to export data:
Standard Export – allows all settings that are not locked to be exported. On import
the user can choose which sections to overwrite. It is good practice to retain a copy of
the exported settings file in case settings need to be restored. Note: technical support
may ask for this file to aid trouble shooting.
Clone Export – The entire device is exported and on import will create a clone of the
original device. Any locked/protected sections are still respected so no exports can be
made from a locked device nor can a locked device be overwritten without knowledge
of the passwords.

Export Tab

Figure 29. Export Tab Screen
This page allows the user to perform a simple Export or an advanced Clone Export.
Export – This exports device settings to a file on the PC that will contain all data,
except for configuration data, if that section has been locked.
Clone Export – See the next section in the manual.
Also see Import (later in the manual) for information about using these exported data
files.
TABLE 14. EXPORT SCREEN
Item
Export button
Clone Export button
Description
Export configuration to a file on the PC. This will open
a file dialog box to allow the user to specify where the
export will be saved
See the next section in the manual
Model 7561-PSDS User Manual |
Issue A
008-0752-00
sps.honeywell.com/ast | 40