Management Tab - Honeywell 7561-PSDS User Manual

MODEL 7561-PSDS
PORTABLE SENSOR DISPLAY – STRAIN BRIDGE
Management
Figure 41. Management Tab Screen
Access to the entire set of Configuration settings can be locked with a password.
Without the password, a user cannot change any of the protected settings which
include the available Display Modes. This tab allows setting a new password or
removing an existing password to protect or release the configuration settings.
m
NOTE
There is no way to unlock a protected section if the password is forgotten! Resetting
of a forgotten password will require proof of right to access and may require a return
to supplier and incur additional cost. DO NOT FORGET YOUR PASSWORD!
TABLE 21. MANAGEMENT
Item Description
Allows a new password to be set to protect the
New Password
configuration settings of the device. This field will be
button
available whether a password exists or not
Confirm Password The new password must be entered in this field as well as
button the previous field
Set Password button Click to set the password
Clear Password
If a password exists, click this button to remove it and to
remove protection of the configuration settings
button
User Features
When set to off the user cannot upgrade the handheld
Allow Firmware
firmware using the Configuration page when Configuration
Update switch
is locked with a password
When set to off, the user cannot change the action
Allow Key Action
assigned to the left, right, up, and down keys on the
Change switch
Settings page
This allows the user to globally override the normal 6-wire
measurement system to allow the use of 4-wire input
Use 4-Wire
connections and saves having to short together the sense
Measurements
inputs when using 4-wire inputs on a 6-wire measurement
switch
system. Note: when using 4-wire measurement, the cable
lengths will not be compensated for
Model 7561-PSDS User Manual |
Issue A
008-0752-00
sps.honeywell.com/ast | 53