Temperature Control Via Sensor/Contact Switch; Assigning Room To A Sensor - Honeywell Hometronic HCM 200d Operation

Temperature control via sensor/contact switch

This chapter describes how to set the temperature of rooms to a
constant value via a digital sensor:
•

Assigning room to a sensor

•
Adapting setpoint of a sensor
•
Reading setpoint of a sensor
Assigning room to a sensor
The sensor/contact switch (any sensor with potential-free con-
tact) must be connected to an HCW 80 and must be known to the
Hometronic Manager.
Example: Assign the living room and kitchen to the "Sensor win-
dow" sensor contact.
Switch to the "Settings" submenu as described on Page 54.
►
The display shows the menu
items of the "Settings" sub-
menu.
Turn the Dial button until "Sen-
►
sor function" is selected.
Press the Dial button.
►
A list of sensors appears in the
display:
Turn the Dial button until the
►
desired sensor is selected, for
example:
Press the Dial button again.
►
The following text is displayed:
Temperature control via sensor/contact switch
INSTALLATION
DE-INSTALLATION
SENSOR FUNCTION
DAYLIGHT SAVING TIME
INSTALLATION
DE-INSTALLATION
SENSOR FUNCTION
DAYLIGHT SAVING TIME
SELECT SENSOR:
SENSOR SOUTH
SENSOR WEST
SENSOR WINDOW
SELECT SENSOR:
SENSOR SOUTH
SENSOR WEST
SENSOR WINDOW
SENSOR ASSIGNMENT
FUNCTION PARAMETER
Adaptation
93