Removing Assignment To A Room - Honeywell Hometronic HCM 200d Operation

Operation
Room temperature sensor HCF 22 and setpoint adjuster HCW 22
After a successful binding, an * appears after the entry Temp.
sensor in the display of the Hometronic Manager:
If you assign the setpoint adjuster HCW 22 to your Hometronic
Manager HCM 200d, an * appears after the "Temp. sensor" and
"Temp. selector" entries.
Press the Back button.
►
An * appears after the room
name in the display:
The room temperature sensor is installed and assigned to the "Dining"
room.

Removing assignment to a room

Change to the "Settings" submenu as described on Page 54.
►
Turn the Dial button until "De-installation" is selected.
►
Press the Dial button.
►
The following text is displayed:
Turn the Dial button to the left
►
until "Setpoint adjuster" is se-
lected.
Press the Dial button.
►
Rooms which have been as-
signed setpoint adjusters ap-
pear in the display.
Turn the Dial button until the
►
desired room name is selected,
"Dining" for example.
Press the Dial button.
►
The assigned devices are dis-
played:
48
LIVING
DINING
KITCHEN
SLEEPING
HEATING/COOLING
SHUTTER
DEVICES/LIGHTS
SENSOR
SHUTTER
DEVICES/LIGHTS
SENSOR
SETPOINT ADJUSTER
LIVING
DINING
SLEEPING
LIVING
DINING
SLEEPING
DINING
TEMP. SENSOR
TEMP. SELECTOR
*
*
*
*
*
*
*
*