Adapting Lamp Brightness To Brightness Values - Honeywell Hometronic HCM 200d Operation

Press the Dial button.
►
The following text is displayed:
Turn the Dial button until the
►
desired value is displayed, for
example:
Press the Dial button.
►
The following text is displayed:
To change the upper threshold value of the brightness sensor,
►
proceed in a similar manner.
The threshold values for the brightness sensor are changed.
Press the Back button in order to leave the submenu.
►

Adapting lamp brightness to brightness values

Example: The living room light is to be switched off when the
brightness value at the 'bright sensor south' brightness sensor is
exceeded and switched on when the brightness value drops to
50 %.
Select a brightness sensor as described in Chapter "Assigning
►
lamps to a brightness sensor" on Page 83.
Press the Dial button.
►
The following text is displayed:
Turn the Dial button until "Func-
►
tion parameters" is selected.
The following text is displayed:
Press the Dial button.
►
The parameters and the mod-
ules assigned to the sensor ap-
pear in the display.
Adapting automatic brightness control
SENSOR SOUTH
Sun protect. off
Threshold low
Threshold high
SENSOR SOUTH
Sun protect. off
Threshold low
Threshold high
SENSOR SOUTH
Sun protect. off
Threshold low
Threshold high
SENSOR ASSIGNMENT
FUNCTION PARAMETERS
SENSOR ASSIGNMENT
FUNCTION PARAMETERS
SENSOR SOUTH
Sunrise
Sunset
Sun protect. on
Adaptation
50%
20%
30%
50%
25%
30%
50%
25%
35%
30%
10%
80%
85