Honeywell Hometronic HCM 200d Operation page 95

Turn the Dial button until "Room
►
control" is selected.
The following text is displayed:
Press the Dial button.
►
The list of room names to which
the HCW 22 or HCF 22 is as-
signed appears in the display.
Turn the Dial button until "living"
►
room is selected.
Press the Dial button.
►
The following text is displayed:
Press the Dial button.
►
An * appears after the "Stage 1"
entry. Stage 1 is installed.
Press the Back button.
►
The following text is displayed:
Activate binding at the HS 20/30 as described in the device's
►
operating instructions.
Turn the Dial button to the left
►
until Stage 2 is selected.
Press the Dial button.
►
An * appears after the "Stage 2"
entry. Stage 2 is installed.
Press the Back button twice.
►
An * appears after the room
name.
The thermostat control with two stages is installed in the living room.
Press the Back button in order to leave the submenu.
►
Adapting thermostat control
DEVICES/LIGHTS
SENSOR
SETPOINT ADJUSTER
ROOM CONTROL
LIVING
DINING
KITCHEN
SLEEPING
LIVING
HS30 Stage 1
HS30 Stage 2
HS30 Stage 3
LIVING
HS30 Stage 1
HS30 Stage 2
HS30 Stage 3
LIVING
HS30 Stage 1
HS30 Stage 2
HS30 Stage 3
LIVING
HS30 Stage 1
HS30 Stage 2
HS30 Stage 3
LIVING
DINING
KITCHEN
SLEEPING
Adaptation
*
*
*
*
*
89