Adapting Setpoint Of A Sensor - Honeywell Hometronic HCM 200d Operation

Adapting setpoint of a sensor

When the sensor contact is open, the temperature of the rooms
assigned to the sensor is set to the constant setpoint. Settings of
the time program, the lifestyle and manual settings are deacti-
vated during this time.
Example: Adapt temperature setpoint of window contact.
Switch to the "Settings" submenu as described on Page 54.
►
The display shows the menu items
of the "Settings" submenu, for
example:
Turn the Dial button until "Sen-
►
sor function" is selected.
Press the Dial button.
►
The following text is displayed:
Turn the Dial button until "Sen-
►
sor window" is selected:
Press the Dial button.
►
The following text is displayed:
Turn the Dial button until "Func-
►
tion parameter" is selected.
Press the Dial button.
►
The setpoint of the sensor is
displayed, for example:
Temperature control via sensor/contact switch
INSTALLATION
DE-INSTALLATION
SENSOR FUNCTION
DAYLIGHT SAVING TIME
INSTALLATION
DE-INSTALLATION
SENSOR FUNCTION
DAYLIGHT SAVING TIME
SELECT SENSOR:
SENSOR SOUTH
SENSOR WEST
SENSOR WINDOW
SELECT SENSOR:
SENSOR SOUTH
SENSOR WEST
SENSOR WINDOW
SENSOR ASSIGNMENT
FUNCTION PARAMETER
SENSOR ASSIGNMENT
FUNCTION PARAMETER
SENSOR WINDOW
Const. setp.
Adaptation
15.0 C
95