Adapting Sun Protection Function Of A Shutter; Assigning A Shutter To A Sensor - Honeywell Hometronic HCM 200d Operation

Adapting sun protection function of a shutter

This chapter shows you how to:
•

Assigning a shutter to a sensor

•
Adapting opening width of a shutter
•
Adapting slat inclination
•
Setting temperature-dependent sun protection (shading) of a
shutter
•
Setting response delay of shutters
Assigning a shutter to a sensor
Sensor (brightness sensor or temperature sensor) and shutter
must be connected correctly and registered with the Hometronic
Manager.
When you assign a shutter to a sensor, the old sensor assign-
ment is overwritten.
Example: Assigning the shutters of the living room and the bed-
room to the brightness sensor south.
Change to the "Settings" submenu as described on Page 54.
►
The display shows the menu
items of the "Settings" sub-
menu.
Turn the Dial button until "Sen-
►
sor function" is selected.
Press the Dial button.
►
A list of sensors appears in the
display:
Adapting sun protection function of a shutter
INSTALLATION
DE-INSTALLATION
FUNCTION EXPANSION
SENSOR FUNCTION
INSTALLATION
DE-INSTALLATION
FUNCTION EXPANSION
SENSOR FUNCTION
SELECT SENSOR
SENSOR SOUTH
SENSOR WEST
WIND SENSOR
Adaptation
73