Adapting Basic System Settings (Parameters); Changing To The "Parameters" Submenu - Honeywell Hometronic HCM 200d Operation

Adapting basic system settings (parameters)

The basic system settings (parameters) should only be modified
by experienced Hometronic users. In any case, read Chapter
"Saving and getting system settings" from Page 54 onwards.

Changing to the "Parameters" submenu

Change to the "Settings" submenu as described on Page 54.
►
Turn the Dial button to the left
►
until "Parameters" is selected:
Press the Dial button.
►
The following text is displayed:
You are in the "Parameters" submenu.
Turn the Dial button to the left
►
in order to make additional en-
tries visible.
The factory settings for the parameters are listed in the table on
Page 104.
Adapting basic system settings (parameters)
FUNCTION EXPANSION
SENSOR FUNCTION
DAYLIGHT SAVING TIME
PARAMETERS
ECO Offset
ECO Thresh.
Temp. Setp.
Shutter Setp.
Boil. demand
Frost protec
Frost temp.
Remote offs.
Adaptation
3.0 C
17.0 C
15.0 C
OPEN
18.0 C
8.0 C
-.- C
2.0 C
99