Adapting Opening Width Of A Shutter - Honeywell Hometronic HCM 200d Operation

In order to reverse the assignment press the Dial button again.
The * disappears. You can assign up to 16 shutter modules to a
sensor.
Press the Back button in order to leave the submenu.
►
To control the shutters with the temperature-dependent sun pro-
tection function, you must install a temperature sensor.
Assigning outside temperature sensor
Select the corresponding sensor in the "Selecting a sensor"
►
menu and then assign the shutters to it.
Assigning internal temperature sensor
Select the corresponding room in the "Selecting a sensor"
►
menu and then assign the shutters to it.

Adapting opening width of a shutter

Example: Adapting the opening width of the living room shutter.
Change to the "Settings" submenu as described on Page 54.
►
The display shows the menu items
of the "Settings" submenu, for
example:
Turn the Dial button until "Sen-
►
sor function" is selected.
Press the Dial button.
►
The following text is displayed:
Turn the Dial button until the
►
sensor to which you want to
assign the sensor is selected,
for example:
Adapting sun protection function of a shutter
INSTALLATION
DE-INSTALLATION
FUNCTION EXPANSION
SENSOR FUNCTION
INSTALLATION
DE-INSTALLATION
SENSOR FUNCTION
DAYLIGHT SAVING TIME
SELECT SENSOR
SENSOR SOUTH
SENSOR WEST
WIND SENSOR
SELECT SENSOR
SENSOR SOUTH
SENSOR WEST
WIND SENSOR
Adaptation
75