Changing Brightness Values (Threshold Values) - Honeywell Hometronic HCM 200d Operation

Adaptation
Adapting automatic brightness control
Turn the Dial button until the
►
name of the desired lamp is se-
lected.
The following text is displayed:
Press the Dial button.
►
An * appears after the lamp
name.
The light in the living room is allocated to the brightness sensor.
Press the Back button in order to leave the submenu.
►

Changing brightness values (threshold values)

Example: Changing the threshold values (brightness) of the
brightness sensor 'bright sensor south' for the switch-on and
switch-off points.
Select a brightness sensor as described in Chapter "Assigning
►
lamps to a brightness sensor" on Page 83.
Press the Dial button.
►
The following text is displayed:
Turn the Dial button until "Func-
►
tion parameters" is selected.
The following text is displayed:
Press the Dial button.
►
The following text is displayed:
Turn
►
"Threshold low" is selected.
The following text is displayed:
84
the Dial button
SENSOR SOUTH
Assign module
SHUTT LIV
LIGHT LIV
SENSOR SOUTH
Assign module
SHUTT LIV
LIGHT LIV
SENSOR ASSIGNMENT
FUNCTION PARAMETERS
SENSOR ASSIGNMENT
FUNCTION PARAMETERS
SENSOR SOUTH
Sunrise
Sunset
Sun protect. on
until
SENSOR SOUTH
Sun protect. off
Threshold low
Threshold high
*
30%
10%
80%
50%
20%
30%